| AJ 8008 53”x 53” x 85” |
| FEATURE'S INCLUDE |
1: Steam Generator
2: Foot Massager
3: Handle Shower
4: Rain Shower
5: Fan
6: Radio System
7: Audio Inpute
8: Mirror back panel
9: Top Light
10: Back Light
11: Needle Body Jets
12: Pillar LED Lights
13: Back Rest
14: Led Display
15: Air Bath System
16: 110 Volt 30 Amp
17: 10 Year Warranty
18: In Line Tub Heater
2: Foot Massager
3: Handle Shower
4: Rain Shower
5: Fan
6: Radio System
7: Audio Inpute
8: Mirror back panel
9: Top Light
10: Back Light
11: Needle Body Jets
12: Pillar LED Lights
13: Back Rest
14: Led Display
15: Air Bath System
16: 110 Volt 30 Amp
17: 10 Year Warranty
18: In Line Tub Heater
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Contact for more information and price |
| Financing Available |
| Aquajet Showers, Inc 108 Village Square No 305 Somers, NY 10589 Phone: 914 533 7257 Fax: 914 533 7257 Email: info@aquajetshowers.com |
WATER FEED REQUIREMENTS
Aquajet showers requires 2 lines, 1 hot 1 cold with 1/2 connectors (using
faucet thread). All water feed pipes should be approximately 48” high. Water
pipes should be in the rear corner of the unit.
ELECTRICAL REQUIREMENTS
All steam generators require a 110 volt 30 amp direct line (hard wired) using a
10-2 wire. Power supply should be approximately 12” from the floor in the
center of the unit at the rear.
All airbaths require a 110 volt 20 Amp direct line (hard wired) using a 10-2 wire.
PLEASE NOTE : You can use the same direct line for both power circuits. If
doing so, use only one feature at a time (steam or airbath). Radio, lights, fan,
etc will all work with both features.
Power supply should be approximately 12” from the floor in the center of the
unit at the rear.
Aquajet showers requires 2 lines, 1 hot 1 cold with 1/2 connectors (using
faucet thread). All water feed pipes should be approximately 48” high. Water
pipes should be in the rear corner of the unit.
ELECTRICAL REQUIREMENTS
All steam generators require a 110 volt 30 amp direct line (hard wired) using a
10-2 wire. Power supply should be approximately 12” from the floor in the
center of the unit at the rear.
All airbaths require a 110 volt 20 Amp direct line (hard wired) using a 10-2 wire.
PLEASE NOTE : You can use the same direct line for both power circuits. If
doing so, use only one feature at a time (steam or airbath). Radio, lights, fan,
etc will all work with both features.
Power supply should be approximately 12” from the floor in the center of the
unit at the rear.